ETC transtechnik FDX2000, Руководство по эксплуатации

Страница: 35 / 42

List of factory settings
The dimmer processor can be reset to the factory settings at the touch of a button, see page 20.
Parameter Value
Source of the dimmer control signals DMX lines A and B
Station address Off
IP address 192.009.200.000
DMX start address -
Dimmer control On
Menu language Deutsch
Display contrast 50%
Dimmer type All: Dimmer
Dimmer curves All: linear
Output voltage at 100% control level All: 230 V
Preheat output level All: 0%
Output voltage limit All: none
Switch point for Nondim All 10% / 10%
Analog signal is used All: No
Type of dimmer feedback All: -/V
Dimmer feedback All: On
Follow-up time for intensity changes All: 160 mms / 160 mms
Network protocol AVAB/UDP
Logical network 0
IP net mask 255.255.255.000
Address of the IP gateway 192.009.200.254
Number of dimmers 96
Behavior in the event of failure of input signal Blackout after 5 s
Global dimmer feedback On
Temperature sensors Both on
Overtemperature warning Both sensors set to 70 °C
Overtemperature shutdown function Both sensors set to 85 °C
Specification for input voltage 3 x 230 V
Weighting factor for all presets 0%
Fade in/out times for presets 0.0 s / 0.0 s
All stored presets Deleted
FDX2000 Vers. 4.0.0 – 31 –