ETC transtechnik FDX2000, Руководство по эксплуатации

Страница: 25 / 42

• [EDIT]
takes you to the most recently called system menu
Sxx
• Use [PAGE] or the encoder to scroll to the Reset to factory settings menu
•
[SAVE]
then resets all parameters to the factory settings.
•
[ESC]
exits edit mode, values are not reset
List of factory settings see page 31.
Working with presets
FDX2000 can store a total of 24 presets. A preset is a local cue, or a complete set of dimmer values for
all connected circuits. You can set the current control level values, create cues and save them as
presets, you can then call up and test these presets using different weighting and you can also specify
the time taken to fade these presets in and out.
A range of menus in the second menu level serves to set the preset parameters. The initial menu is the
M08
Preset menu which can be found in the topmost level. The letter
P
as part of the menu numbering
(
P01
,
P02
, ...) identifies that this is a preset menu.
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M08
Preset menu
• [EDIT]
takes you to the most recently called Preset menu
P0X
.
•
Use
[PAGE]
or the encoder to scroll through the menus
P01, Saving presets
In the
P01
Save preset menu you can save the current control levels of
all dimmers as a preset. It is not relevant whether the current control level
values are determined by external signal sources (DMX and/or Ethernet)
or whether the current control level values are created locally in the
D11
Dimmer test menu
(see page 16).
Save P01
preset: 1
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M08
Preset menu
•
[EDIT]
takes you to the most recently called Preset menu
P0X
.
•
Use
[PAGE]
or the encoder to scroll to the
P01
Save preset menu
Save preset
•
[EDIT]
to causes the preset number to flash.
•
<Encoder> selects the number under which the preset is to be saved.
•
[SAVE]
saves the current output level values as a preset under the selected
number.
• [ESC]
exits edit mode without saving.
Use the
D11
Dimmer test menu to create entire lighting cues and then save them as presets using the
P01
Save preset menu, see page 16.
P02, Preset test
In the
P02
Preset test menu you can fade in presets individually or in
combination with different weighting.
Preset test P02
[EDIT]
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M08
Preset menu
•
[EDIT]
takes you to the most recently called Preset menu
P0x
.
FDX2000 Vers. 4.0.0 – 21 –