ETC transtechnik FDX2000, Руководство по эксплуатации

Страница: 15 / 42

Dimmer settings
A range of menus in the second menu level allows you to set the parameters for individual dimmer
channels. The initial menu is the
M06
Dimmer menu which can be found in the topmost level. The letter
D
as part of the menu numbering (
D01
,
D02
, ...) indicates that this is a dimmer parameter menu.
Ranges of Dimmers with identical Settings
Dimmers with identical settings are grouped into ranges in the display.
Example Submenu D01, Dimmer type
01-16: Dimmer
17-19: Nondim
dimmers 17 through 19 are of type "Nondim",
20-21: Dimmer
22-22: Blind
empty slot
23-24: Dimmer
25-25: Blind
empty slot
25-96: Dimmer
Edit modes
To allow you to make the various possible settings there is a range of different edit modes which may be
called in succession by repeatedly pressing the
[EDIT]
button (the Edit LED is illuminated).
(A) Scroll through all currently available ranges
This is only opened if there is more than one range.
[ESC]
Exits edit mode.
[PAGE]
Takes you to the next dimmer submenu.
[EDIT]
Calls edit mode (B).
[SAVE]
Has no effect.
<Encoder> Selects the next/previous dimmer range.
(B) Change setting in the current range
Identified by: Setting flashes.
[ESC]
Exits edit mode.
[PAGE]
Takes you to the next submenu.
[Edit
Calls edit mode (C).
[SAVE]
Saves the changed values and terminates edit mode.
<Encoder> Changes the dimmer type.
(C) Change start of range
Identified by: Number for start of range flashes.
[ESC]
Exits edit mode.
[PAGE]
Takes you to next submenu.
[EDIT]
Calls edit mode (D).
[SAVE]
Saves the changed values and terminates edit mode.
<Encoder> Changes the start of range.
(D) Change end of range
Identified by: Number for end of range flashes.
[ESC]
Exits edit mode.
[PAGE]
Takes you to next submenu.
[EDIT]
Calls edit mode (A).
[SAVE]
Saves the changed values and terminates edit mode.
<Encoder> Changes the end of the range.
The software will automatically correct the value of neighboring ranges.
FDX2000 Vers. 4.0.0 – 11 –