ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 75 / 84

Irideon Control Installation and User Manual 71
Program Header Menu
TIME - set time, date, daylight savings time
CONF - 12/24, stagger up, durations 1-4, duty cycles 1-4
ASTR - sunrise, sunset, latitude, hemisphere
EVNT - on, off, durations 1-4, duty cycles 1-4
INPT - configure inputs
EVNT SENS - sensor events
HOL - set holidays
N o t e :
From the HOL menu header, the control will loop around to the TIME
header. The OVER (override) mode is only accessible from the RUN
mode.
Mode Descriptions
In all modes, use the NEXT key to advance to the next item to be
programmed or reviewed and the PREVIOUS key to go back to the
previous item. Use the + and - keys to modify the current (flashing) item.
Memory Clear - Indicates that the memory has been cleared. Use the
NEXT key to begin programming. After initial power-up or a reset, the
control will be in MEM CLR (memory clear) mode. This mode is only
accessible once.
MAINTained Operation - when configured for maintained relay operation
the ATC will only require use of channel one.
CLOCK FORMAT - Toggle between 12 hour (AM/PM) or 24 hour (00:00-
23:59) clock format using the +/- key.
SET TIME HEADER - This mode is used for setting time, date and daylight
saving time. Program hours, minutes, seconds and day of week using the
+/- key. The PM indicator is used in the 12 hour format. AM begins with
midnight and PM begins with noon. Only the PM indicator will appear in the
12 hr. format. Program month, date and year by using the +/- key.
ASTRO HEADER - The Astro function provides a means for controlling
lights based on the changing sunrise and sunset times throughout the year
without use of a photocell. The Astro feature does not turn loads on or off.