ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 23 / 84

Irideon Control Installation and User Manual 19
Step 2: Remove the female portion of the terminal strip and attach
wiring utilizing the following pin/wire code:
a. 2-Pin DC Power Terminal Strip P2 on MCP feeds ATC or
Remote Control Stations:
b. 3-Pin Data Terminal Strip P3 on MCP feeds ATC or Remote
Control Stations:
c. 3-Pin Data Terminal Strip P5 on MCP feeds luminaire data
run # 1:
d. 3-Pin Data Terminal Strip P7 on MCP feeds luminaire data
run # 2:
e. 3-Pin Data Terminal Strip P9 on MCP for DMX512 output:
For Step 2: (b. thru e.) use the following pin/wire code:
Step 3: Connect AC power as shown:
International Standard: Neutral = Blue; Line = Brown; Ground = Grn/
Yellow
Step 4: Replace the front panels.
Pin
Wire
(Belden 8461 or 2-#18
gauge)
+ (24vdc) Black
- (Gnd) White
Pin Wire (CAT 5) Belden 9729
data + White/Orange Red
data - Orange Black
Gnd Brown Drain