ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 13 / 84

Irideon Control Installation and User Manual 9
Composer / MCP Control System
The Composer / MCP Control System provides flexible control of your
Irideon luminaires. This type of system must include a PC running
Windows®, Composer Software, and a Master Control Processor.
Optional controls include Remote Stations and Astronomical Time Clock.
• Personal Computer (PC not provided by ETC) - Used to program
lighting presets and sequences, execute diagnostics, and
communicate to Master Control Processor. The PC connects the
Master Control Processor (MCP) via serial extension cable to a DB9
connector located on the front panel of the MCP or connected to the
MCP remotely via MCP Remote Programming Receptacle station.
The PC can download programmed sequence data to the MCP for
later recall. After initial programming and the show download is
complete the PC may then be removed from the system until updated
programming is required.
Minimum recommended requirements for the PC:
• Pentium Processor, 75MHz
• 16Mb RAM
• 15Mb available hard disk space
• Unused serial comm port
• VGA color display
Closure Station
Station Address
x10 x1
AC
AC
AC
AC
MCP
ATC
CS
MPR
8RS 2RS
To DMX-512
Devices
AR6's
AR50's
AR500's
Standard & Remote
Luminaire Data
Recall Station
Data & 24VDC