ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 46 / 84

42 Troubleshooting
System Identification
If you are experiencing problems with your Irideon system please refer to
this manual and the accompanying luminaire user’s manual for
assistance. If you do not find the answer in the manual’s please call your
local dealer or ETC Technical Services.
Your Irideon Control System may be defined as any of the following:
Composer / MCP Control System with Irideon luminaires
This system is comprised of a PC running Windows® and Composer
Software which will be used only for initial programming, then removed
from the system until reprogramming is required. Installed ETC® product
will include a Maser Control Processor (MCP), Irideon automated
luminaire(s), and may include any of the following as optional equipment;
recall stations, closure stations, MCP programming receptacle stations,
keyswitch stations, and the Irideon Astronomical Time Clock (ATC).
Composer Lite Control System
This system is comprised of a PC running Windows® and Composer Lite
Software, and the Composer Lite Programming kit which will be used only
for initial programming, then removed from the system until
reprogramming is required. Installed ETC® products will include Irideon
automated luminaire(s) and may include a Luminaire Programming Jack
for easy programming access.
DMX Interpreter Control System
This system is comprised of a DMX Interpreter, which receives 512 data
from a DMX 512 control console, and converts the DMX 512 into Irideon
protocol for control of Irideon automated luminaires. Installed ETC®
products include the DMX Interpreter and Irideon automated luminaires.