Hardware-Installation
CAN-CBX-AI420
Manual • Doc.-No.: C.3030.21 / Rev. 1.4
Page 21 of 103
4.
When mounting the CAN-CBX module the metal foot catch snaps on the bottom edge of the
mounting rail. Now the module is mounted on the mounting rail and connected to the InRailBus
via the bus connector. Connect the bus connectors and the InRailBus if not already done.
Figure 7: Mounted CAN-CBX module
3.4.1 Connecting Power Supply and CAN-Signals to CBX-InRailBus
To connect the power supply and the CAN-signals via the InRailBus, a terminal plug is needed. The
terminal plug is not included in delivery and must be ordered separately (order no.: C.3000.02, see order
information).
Fig. 8: Mounting rail with InRailBus and terminal plug
Plug the terminal plug into the socket on the right of the mounting-rail bus connector of the InRailBus,
as described in Fig. 8. Then connect the CAN interface and the power supply voltage via the terminal
plug.