Mini MIRI
®
Dry and Mini MIRI
®
Humidity Multiroom IVF incubators User Manual
Rev. 3.0
18
Compartment numbers are shown in the picture below and also indicated on the top of
the lid with labels:
Figure 7.1
Compartment numbers on Mini MIRI
®
Dry and Mini MIRI
®
Humidity
multiroom IVF incubators
8 Important safety instructions and warnings
8.1 Before installation
1.
Do not use the product if the package is damaged. Contact Esco Medical or the local
representative.
2.
Read the user manual thoroughly before use.
3.
Always keep these instructions easily accessible near the device.
8.2 During installation
1.
Never place this unit on top of other equipment that gives off heat.
2.
Place this unit on a flat, hard and stable surface.
3.
Do not place the unit on a carpet or similar surfaces.
4.
Do not defeat the safety purpose of the grounding-type (earthing) plug.
5.
A grounding-type (earthing) plug with two blades and a third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician to replace the outlet.
6.
Always connect the power cord to a properly grounded outlet and only use the
cord that came with the device.
7.
Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus that produce heat.
8.
Do not use this device near water sources.
9.
Use only 100% concentration CO
2
and 100% concentration N
2
gases.
10.
Always use an external HEPA filter for input CO
2
and N
2
gases.
11.
Do not use this product if the room temperature exceeds 30 °C.
