2.
Enter a value for each item.
3.
Select
OK
.
The settings you have selected are displayed.
Related Information
&
“Running Web Config on a Web Browser” on page 374
LDAP Server Setting Items
Items
Settings and Explanation
Use LDAP Server
Select
Use
or
Do Not Use
.
LDAP Server Address
Enter the address of the LDAP server. Enter between 1 and 255 characters of
either IPv4, IPv6, or FQDN format. For the FQDN format, you can use alphanumeric
characters in ASCII (0x20-0x7E) and "- " except for the beginning and end of the
address.
LDAP server Port Number
Enter the LDAP server port number between 1 and 65535.
Secure Connection
Specify the authentication method when the printer accesses the LDAP server.
Certificate Validation
When this is enabled, the certificate of the LDAP sever is validated. We
recommend this is set to
Enable
.
To set up, the
CA Certificate
needs to be imported to the printer.
Search Timeout (sec)
Set the length of time for searching before timeout occurs between 5 and 300.
Authentication Method
Select one of the methods.
If you select
Kerberos Authentication
, select
Kerberos Settings
to make
settings for Kerberos.
To perform Kerberos Authentication, the following environment is required.
❏
The printer and the DNS server can communicate.
❏
The time of the printer, KDC server, and the server that is required for
authentication (LDAP server, SMTP server, File server) are synchronized.
❏
When the service server is assigned as the IP address, the FQDN of the service
server is registered on the DNS server reverse lookup zone.
Kerberos Realm to be Used
If you select
Kerberos Authentication
for
Authentication Method
, select the
Kerberos realm that you want to use.
Administrator DN / User Name
Enter the user name for the LDAP server in 128 characters or less in Unicode
(UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F. This
setting is not used when
Anonymous Authentication
is selected as the
Authentication Method
. If you do not specify this, leave it blank.
Password
Enter the password for the LDAP server authentication in 128 characters or less in
Unicode (UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F.
This setting is not used when
Anonymous Authentication
is selected as the
Authentication Method
. If you do not specify this, leave it blank.
>
>
481
Содержание WorkForce Pro WF-C879R
