Epson WorkForce Pro WF-C879R, Руководство пользователя

Страница: 353 / 576

Selecting a Network that has an LDAP Server (When Using an Additional
Network)
You can use the LDAP server on either the standard or additional network.
Follow the steps below to select the network that has the LDAP server you want to use.
1.
Select Settings on the home screen.
2.
Select General Settings > Network Settings > LDAP Server .
3.
Select
Standard
or
Additional
for the network that has the LDAP server.
Receiving Email Notifications When Events Occur (When Using an Additional
Network)
About Email Notifications (When Using an Additional Network)
This is the notification function that, when events such as printing stop and printer error occur, send the email to
the specified address.
You can register up to five destinations and set the notification settings for each destination.
To use this function, you need to set up the mail server before setting up notifications. Set up the email server on
the network (standard or additional) to which you want to send the email.
Related Information
&
“Configuring a Mail Server” on page 452
Configuring Email Notification (When Using an Additional Network)
Configure email notification by using Web Config from a computer on the standard network.
1.
Enter the printer's IP address for the standard network into a browser to access Web Config.
2.
Select the Device Management tab > Email Notification .
3.
Set the subject of email notification.
Select the contents displayed on the subject from the two pull-down menus.
❏
The selected contents are displayed next to Subject .
❏
The same contents cannot be set on left and right.
❏
When the number of characters in Location exceeds 32 bytes, characters exceeding 32 bytes are omitted.
4.
Enter the email address for sending the notification email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
5.
Select Standard or Additional for the network used to send to recipients.
Using Optional Items
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
>
Settings when Using an Additional Ne
…
353