manualshive.com logo in svg

Epson SureColor S50675, Руководство пользователя

Принтер Epson SureColor S50675 - мощное устройство для печати высокого качества. На нашем сайте вы можете бесплатно скачать его Руководство пользователя. Не забудьте загрузить его с manualshive.com. Получите подробные инструкции по настройке и использованию этого принтера, чтобы достичь идеальных результатов.

Поделиться
Скачать
background image

Software License Terms

252

11. Ownership. Subject to the licenses granted under this License, each Contributor 
retains all rights, title and interest in and to any Modifications made by such Contributor. 
Apple retains all rights, title and interest in and to the Original Code and any Modifications 
made by or on behalf of Apple ("Apple Modifications"), and such Apple Modifications will 
not be automatically subject to this License. Apple may, at its sole discretion, choose to 
license such Apple Modifications under this License, or on different terms from those 
contained in this License or may choose not to license them at all.

12. Termination.

12.1 Termination. This License and the rights granted hereunder will terminate:

(a) automatically without notice from Apple if You fail to comply with any term(s) of this 
License and fail to cure such breach within 30 days of becoming aware of such breach;

(b) immediately in the event of the circumstances described in Section 13.5(b); or

(c) automatically without notice from Apple if You, at any time during the term of this 
License, commence an action for patent infringement against Apple; provided that Apple 
did not first commence an action for patent infringement against You in that instance.

12.2 Effect of Termination. Upon termination, You agree to immediately stop any further 
use, reproduction, modification, sublicensing and distribution of the Covered Code. All 
sublicenses to the Covered Code which have been properly granted prior to termination 
shall survive any termination of this License. Provisions which, by their nature, should 
remain in effect beyond the termination of this License shall survive, including but not 
limited to Sections 3, 5, 8, 9, 10, 11, 12.2 and 13. No party will be liable to any other for 
compensation, indemnity or damages of any sort solely as a result of terminating this 
License in accordance with its terms, and termination of this License will be without 
prejudice to any other right or remedy of any party.

13. Miscellaneous.

13.1 Government End Users. The Covered Code is a "commercial item" as defined in FAR 
2.101. Government software and technical data rights in the Covered Code include only 
those rights customarily provided to the public as defined in this License. This customary 
commercial license in technical data and software is provided in accordance with FAR 
12.211 (Technical Data) and 12.212 (Computer Software) and, for Department of Defense 
purchases, DFAR 252.227-7015 (Technical Data -- Commercial Items) and 227.7202-3 
(Rights in Commercial Computer Software or Computer Software Documentation). 
Accordingly, all U.S. Government End Users acquire Covered Code with only those rights 
set forth herein.

13.2 Relationship of Parties. This License will not be construed as creating an agency, 
partnership, joint venture or any other form of legal association between or among You, 
Apple or any Contributor, and You will not represent to the contrary, whether expressly, by 
implication, appearance or otherwise.

Содержание SureColor S50675
































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SureColor S50675

Weidmuller MCP Basic 2 Operating Instructions Manual preview
MCP Basic 2
Бренд: Weidmuller Страницы: 308

Бренды по названию

Популярные бренды

Загрузить еще бренды