Epson S5U1C17001C, Руководство пользователя

Страница: 587 / 742

10-136
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
source
(execute command file) [ICD Mini / SIM]
Operation
Loads a command file and successively executes the debug commands written to the file.
Format
source Filename
Filename : Name of command file
Usage example
<File name =
src.cmd
>
# load symbol information
file /cygdrive/c/EPSON/gnu17/sample/tst/sample.elf
#connect to the debugger with specified mode and port
target sim
# load to memory
load /cygdrive/c/EPSON/gnu17/sample/tst/sample.elf
# reset
c17 rst
From # to the end of the line is interpreted as a comment.
(gdb) source src.cmd
(gdb)
(gdb) file /cygdrive/c/EPSON/gnu17/sample/tst/sample.elf
(gdb)
(gdb) target sim
boot () at boot.s:9
Connected to the simulator.
Current language: auto; currently asm
(gdb)
(gdb) load /cygdrive/c/EPSON/gnu17/sample/tst/sample.elf
Loading section .text, size 0xbc lma 0xc00000
Start address 0xc00000
Transfer rate: 1504 bits in <1 sec.
(gdb)
(gdb) c17 rst
CPU resetting ...................... done
A specified command file is loaded and the commands contained in it are executed successively. The commands
are displayed in the [Console] window as shown in the example above.
GUI
Choose [Source...] from the [File] menu in the [Source] window, select a command file in the ensuing dialog
box, then click [Open]. The command file selected is loaded and the commands written to the file are executed.
Notes
• If the command file contains a description error, the debugger stops executing the command file there.
Because no error messages appear in this case, be very careful when creating a command file.
• Once the
source
command is executed, it can be executed repeatedly by simply pressing the [Enter] key, as
for other commands. In this case, all commands written to the command file are executed repeatedly.