Epson S5U1C17001C, Руководство пользователя

Страница: 530 / 742

10-80
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
GUI
The
until
command can also be executed using the method described below.
1. In the [Source] window, right-click near the left end of a line where you wish to set a temporary breakpoint.
A popup menu will appear. (First, confirm whether there is a breakable instruction on that line.)
2. Choose [Jump to Here] from the popup menu.
The target program will start running from the current PC address and stop at this line.
While the
until
command executes target program, the contents displayed in the [Source] and [Registers]
windows are updated in real time. The [Memory] window is not updated.
Notes
• To run the program from the beginning, execute
c17 rst
(reset) before the
until
command.
• If the location set as a temporary breakpoint is a C source line that does not expand to mnemonic, the
program does not break at that line. The program breaks at the address of the first mnemonic executed
thereafter.
• No temporary breakpoints can be set on the following lines, because an error is assumed.
- Extended instruction lines (except for the
ext
instruction at the beginning)
- Delayed instruction lines (next line after a delayed branch instruction)
• If temporary breakpoints are specified using a nonexistent function name or line number, an error is assumed.
• If temporary breakpoints are specified by an address value that exceeds the 24-bit range, an error is assumed.
• When specifying temporary breakpoints by address value and the address is specified with an odd value, the
specified address is adjusted to the 16-bit boundary by assuming LSB = 0.