Epson S5U1C17001C, Руководство пользователя

Страница: 590 / 742

S5U1C17001C ManUal
EPSOn
10-139
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
target
(connect target) [ICD Mini / SIM]
Operation
Establishes connection to the target and sets connect mode.
ICD Mini mode: Connected with the ICD Mini (S5U1C17001H) or ICD board via a USB interface.
Simulator mode: Debugger is set to simulator mode.
Format
target Type
Type : One of the following symbols that specify the target
icd usb
: Connected with the ICD via a USB interface (in ICD Mini mode).
icd usb2
: Connected with the ICD via a USB interface (in ICD Mini mode).
This is used when debugging the target in an environment where a single PC and
two ICD units are connected via USB. The debugger must be started up with the
--c17_double_starting
specified and use "
target icd usb2
" to connect the
debugger. This allows you to start two debuggers with a single PC.
sim
: Simulator started (in simulator mode).
Usage example
n
Example 1
(gdb) target sim
Connected to the simulator.
The debugger is set to simulator mode.
n
Example 2
(gdb) target icd usb
The debugger is set to ICD Mini mode.
Notes
When you set a memory map by loading a parameter file, be sure to execute the
c17 rpf
command before the
target
command. Also be sure to execute the
target
command before the
load
command, and the
file
command before the
target
command. The following shows the basic sequence of command execution:
(gdb) c17 rpf sample.par
(sets map information.)
(gdb) file sample.elf
(loads debugging information.)
(gdb) target icd usb
(this command)
(gdb) load
(loads the program.)
(gdb) c17 rst
(resets the CPU.)