Epson S5U1C17001C, Руководство пользователя

Страница: 608 / 742

S5U1C17001C ManUal
EPSOn
10-157
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
10.8.3.3 Error Messages Displayed by Profile Window and Coverage Window
Errors are displayed in the message box (provided with an [OK] button).
Measurement results are not displayed after you click the [OK] button.
An error is displayed at the time a window is opened or a profiler measurement data file is loaded.
Table 10.8.3.3.1 Error messages
Message Description
No profiling data. The profiler measurement data file cannot be found.
This file is not profiler format. The size of the specified profiler measurement data file is 0.
This file is not C17 architecture. The specified file is not for C17. The ID is not “C17PROF.”
not enough memory. Adequate memory area could not be secured in the PC.
Version mismatch. The version of the profiler measurement data file is not
supported. The tool version differs from the version used to
create the measurement data.
Program called too many functions. The program called more than 10,000 different functions.
Program called too deep functions. The program made more than 10,000 deep calls as viewed from
the top function.
Cycle counter was overflowed. The cycle counter exceeded 32 bits.
Function address were overlapped An overlap in function address occurred.
unexpected error occured in GDB. Measurement was not conducted properly. Restrictions may
have been violated (e.g., there is no assembler source type
declaration; refer to Section 10.8.8.4, “Restrictions.”)
Merging mismatch (Function name) The function names and the number of functions at the merge
source and merge destination failed to match.
Merging mismatch (Start or End address) The starting addresses and ending addresses at the merge
source and merge destination failed to match.