Epson S5U1C17001C, Руководство пользователя

Страница: 75 / 742

S5U1C17001C ManUal
EPSOn
3-45
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
3 SOfTWarE DEVElOPMEnT PrOCEDUrES
3
SoftDev
3.4 Tutorial 2 (Using the User Makefiles)
In this section, as an example for using a user makefile, a user linker script file and a user command file, we'll take
a look at a series of procedures, from building a project in the
IDE
to starting the debugger. For basic information
on using the
IDE
, etc., refer to Tutorial 1.
Files used
Tutorial 2 uses the sample files listed below that exist in the
c:\EPSON\gnu17\sample\S1C17common\
simulator\simulatedIO
directory.
vector.c
Vector table file
main.c
C source file
mymakefile.mak
Makefile
myldsfile.lds
Linker script file
mycmdfile.cmd
Debugger command file (for simulator mode)
myparfile.par
Parameter file
3.4.1 Creating a Project
First, create a new project with the IDE .
Step 1
: Launch the
IDE
.
Step 2 : Select [New] > [New GNU17 Project] from the [File] menu to start the [New GNU17 Project] wizard.
Step 3
: Enter the project name "
mymake_sample
" in the [Project name:] field.
In this tutorial, we create a project folder in the workspace (default). Leave the [Use default location] check box se-
lected.