Epson IR-320, Техническое справочное руководство

Страница: 238 / 340

4-58 Utilities Rev. C
Error messages are shown below:
28-Key Configuration Utility for MS-DOS
The 28-key configuration utility for MS-DOS can define the keys and Shift +keys on the 28-key
keyboard unit connected to the IR-320 in MS-DOS.
This program has been preinstalled in the following directory:
C:/Backup/Keycfg/DOS/
This program is stored on the floppy disk that comes with the 28-key keyboard unit and is
installed on the hard disk by executing the install program.
See the table “Definable keys” on page 4-60 for the keys that can be defined.
Note:
Do not input from the keyboard while the defined keys are being written to the keyboard.
Start
During installation, the key definition utility for MS-DOS (
POSKB28.EXE
) is copied into the
specified directory. If no directory is specified, the utility is copied into the
C:\POSKB
directory.
Start this program as follows:
1. Exit Windows, and restart the system in DOS mode.
2. At the DOS prompt, type
POSKB28
, and press Enter .
POS key error messages
Message Description
Firmware version is not correct Firmware version error, and others
Invalid parameter Parameter error
Communication error Communication error
Invalid pathname Pathname error
Key definitions
Number of definitions
21 characters maximum per key
(Shift/Ctrl/Alt/Gray are each handled as one character)
Operation Keyboard (mouse not available)
Functions
File 1. Designating a key-definition file
Load 2. Reading data from a key-definition file
Save 3. Writing data to a key-definition file
Edit 4. Editing a key-definition file
Download 5. Writing defined keys to the keyboard