Epson IR-320, Техническое справочное руководство

Страница: 191 / 340

Rev. C Utilities 4-11
IR-320 Technical Reference Manual
The following paragraphs define each item on the screen:
❏
Ignore MSR/Keyboard Command
If this check box is checked, all commands to the keyboard firm are not accepted. Typically,
this check box is checked for use with the external programmable keyboard. It has not been
checked in the initial setting.
Note:
Be careful that if this check box is checked, this utility cannot be started unless the main body is
turned off or reset. To uncheck this check box, reboot the main body, or, alternatively, start this utility
with the external keyboard disconnected.
❏
Use MSR Beep
This is used to sound the beep at the time of reading.
❏
MSR Track Recognition (ISO/JIS1 Track 1, ISO/JIS1 Track 2, ISO Track 3)
Check the check box of the track to be read. More than one track may be specified
accordingly. Track 1,2 and Track 3 have been selected in the initial setting.
❏
MSR Code Type (English,Japanese,French,German,Spanish)
Selection is made according to the language setting of Windows.
❏
MSR Start/End Sentinels (Card Start, Card End, ISO/JIS1 Track 1 Start, ..., JIS2 Start, JIS2
End)
The characters to be prefixed and affixed to the data during the MSR reading are specified.
It is possible to specify this setting for each card and each track. Leave this field blank if no
character is to be added. The default settings are as follows:
Track 1 Start: “%” Track 1 End: “?”
Track 2 Start: “;” Track 2 End: “?”
Track 3 Start: “+” Track 3 End: “?”
Use any of the following special characters:
Carriage return: “\R” or “\r”
Tab: “\T” or “\t”
“\”: “\\”
Others: “\xx” Specified directly with xx, representing character codes as
hexadecimals.