Epson IR-320, Техническое справочное руководство

Страница: 275 / 340

Rev.C 5-15 BIOS Functions
IR-320
Technical Reference Manual
Supplementary Explanation for Power Management
Hard Disk Drive Power Down Mode
The HDD Power Down Timer settings are made through the OS in Windows XP/2000/98, but
in Windows NT/95 and DOS, the settings are made through the BIOS, as detailed below. To
have the HDD motor stop when the HDD is not accessed for a certain time, follow the steps
below:
1. Start up the BIOS Setup Utility.
2. Select [Power Management Setup].
3. Select [HDD Power Down].
4. Select the time in the option.
5. Save it and restart.
Resume by
Alarm Use this setting to turn on the power with the alarm (date and time). Set Resume by Alarm to
the desired setting to enable or disable this function.
Enabled: Choose this to enable the alarm function.By selecting this, Date (of Month) Alarm
and Time (hh:mm:ss) Alarm can also be set.
Disabled: Choose this to disable the alarm function.This is the default setting.
Use Date (of Month) Alarm to set the appropriate date.
Use Time (hh:mm:ss) Alarm to set the appropriate time.
Once the setting is made, the power turns on or the system resumes to Full-On Mode on the
selected day and time each month.
Date(of Month)
Alarm
Time(hh:mm:ss)
Alarm
System Battery Sets the system battery is equipped/not equipped.
The default is “Not Equipped”.
There are two options; “Not Equipped” and “Equipped”.
Reload Global
Timer Events Sets the event to reload (reset) the BIOS power management timer.
This is treated as a resume event from Suspend Mode.
Primary IDE 0
:
IDE primary master access (I/O trap) is generated.
Primary IDE 1: IDE primary slave access (I/O trap) is generated.
Secondary IDE 0: IDE secondary master access (I/O trap) is generated.
Secondary IDE 1: IDE secondary slave access (I/O trap) is generated.
FDD, COM, LPT Port: Access to the floppy disk drive, serial port, or the parallel port is
generated.
PCI PIRQ[A-D]#: APCI interrupt request (I/O trap) is generated.
The default setting are as follows.
Primary IDE 0: Enabled
Primary IDE 1: Disabled
Secondary IDE 0: Disabled
Secondary IDE 1: Disabled
FDD, COM, LPT Port: Enabled
PCI PIRQ[A-D]#: Disabled
Table 5-5 Power Management Setup menu (continued)
Items Description