Epson IR-320, Техническое справочное руководство

Страница: 81 / 340

Rev. C Setup 2-43
IR-320 Technical Reference Manual
Confidential
Installing a 28-Key Keyboard Unit (DM-K028)
The 28-Key Keyboard unit is an optional input device for the IR-320. It has 28 keys in total, 4
columns by 7 lines. The function of each key can be freely assigned by software. By assigning the
same function to more than one key, these keys can be used as one large key. This keyboard also
can be used in connection with a magnetic stripe reader (MSR).
Note:
The software stored on the floppy disk is for the IR-300. So do not use it for this system.
Operation progress
1. Confirm that OS is installed.
2. Change the key top and the key top cover of the 28-Key Keyboard unit.
3. Set up the 28-Key Keyboard unit to the IR-320 main unit.
4. Turn the power of the IR-320 on and install the K/B firmware relation utility.
5. Using the utility, set the key definition and write the setting contents to the K/B firmware.
(The setting contents can be written and saved as the definition file.)
6. Now you can use the 28-Key Keyboard unit.
Setup procedure
Follow these steps to install the 28-Key Keyboard unit :
1. Remove the connector cover on the right side of the LCD unit. If an MSR unit is attached,
remove it.