Epson IR-320, Техническое справочное руководство

Страница: 84 / 340

2-46 Setup Rev. C
Confidential
2. Snap the key top cover on the key top with the round concave facing upward. Firmly push it
until the key top cover clicks.
Removing the key top cover
To remove the key top cover, use the following procedure:
1. Take off the key top using the key top remover.
2. Turn the key top over, and push the key top cover off using a pin or a sharp-pointed tool.
Utility
For the keying-in using the 28-Key Keyboard unit, the definition data of each key must be set
using the utility and the setting contents must be written in the K/B firmware.
Refer to “Chapter 4 Utilities” about the installation and the way of using each utility.
Setting and writing the definition data of the 28-Key Keyboard in the K/B firmware
❏
The 28-key definition utility (The Windows version and the MS-DOS version)
Back up the definition data
The definition data is written in the K/B firmware but please back it up. The backup file is made
in the 28-Key Keyboard definition utility. The backup file is witten in the K/B firmware with the
definition data automatic setting utility. This way the same setting can be used for more than
one system to make a setup, and it can be used as a batch file.