Epson Aculaser 2600 Series, Руководство пользователя

Страница: 62 / 473

62
Paper Handling
Labels
You can load up to 16.5 mm thick stack of labels into the MP tray
at a time. However, you may need to feed some labels one sheet
at a time, or load them manually.
Note:
❏
Duplex printing is not available for labels.
❏
Depending on the quality of labels, the printing environment, or the
printing procedure, labels might be wrinkled. Make a trial print run
before you print on a lot of labels.
When loading labels, you should make paper settings as shown
below:
❏
Make settings on the Basic Settings in the printer driver.
❏
You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 229.
Note:
❏
You should only use labels designed for laser printers or plain-paper
copiers.
❏
To prevent the label adhesive from coming into contact with printer
parts, always use labels that completely cover the backing sheet, with
no gaps between the individual labels.
❏
Press a sheet of paper on top of each sheet of labels. If the paper sticks,
do not use those labels in your printer.
Paper Size: A4 or LT
Paper Source: MP Tray (up to 50 sheets)
Paper Type: Labels