Epson Aculaser 2600 Series, Руководство пользователя

Страница: 267 / 473

Using the Control Panel
267
7
7
7
7
7
7
7
7
7
7
7
7
There is insufficient memory to print the page at the specified
print quality. The printer automatically lowers the print quality
so that it can continue printing. If the quality of the printout is not
acceptable, try simplifying the page by limiting the number of
graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. See "How to access the control panel menus" on page
223 for instructions.
Turn the
Image Optimum
setting off on the control panel’s Printing
Menu if you do not want the printer to automatically lower the
print quality to continue printing.
You may need to increase the amount of printer memory to be
able to print at the desired print quality for your document. For
more information on adding memory, see "Memory Module" on
page 303.
Install Fuser
There is no fuser unit installed or the fuser unit is not installed
properly. Turn off the printer, then install the fuser unit if it is not
installed.
If a fuser unit is already installed, turn the printer off and reinstall
the unit after it has cooled off (30 minutes). Open covers A and B.
Remove the fuser unit, then reinstall it properly. Close covers A
and B. The error clears automatically if the fuser unit is properly
installed.
If the error is not cleared, the fuser unit is out of order. Replace it
with a new fuser unit.
Install Photoconductor
There is no photoconductor unit installed or the photoconductor
unit is not installed properly. Turn off the printer and install the
photoconductor unit if it is not installed.