Epilog Fusion 13000, Руководство пользователя

Страница: 98 / 228

Section 6: Using the Epilog Dashboard
68
Freq (Frequency)
Frequency is the number of laser pulses that the laser fires per inch of travel and is
set in the dashboard and can be adjusted from 1 to 100. A lower frequency
number will have the effect of less heat because fewer pulses are being used to cut
the material. Lower frequency rates are helpful for products like wood where
charring is evident at higher frequencies. High frequencies are useful on material
like acrylic where a large amount of heat is desirable to melt, or flame polish the
edges.
Very low frequencies, (from about 1 to 5) will produce a perforation, as opposed
to a continuous cut.
Low Frequency Pulsing Higher Frequency Pulsing