Epilog Fusion 13000, Руководство пользователя

Страница: 54 / 228

Section 5: Installing the Epilog Dashboard
Print Driver
24
1) Insert the Epilog driver install disk into your computer. One of the following
screens will appear. For the USB installation, you will want to close then. We
do not want the computer to automatically try and install the driver. Manually
installing the driver will be much more successful.
2) Connect the USB cable to your computer and your Fusion.
3) After closing the Window above and connecting the USB cable, power on
your Fusion laser system. It will take about a minute for the Fusion to
initialize. After it initializes it will start the process of installing the driver.
You will see activity on the USB icon in your system tray (lower right corner
of your computer screen).
The activity will show a small window in the lower right corner that indicates
installation was successful. This is only partially true.
After a short wait you will see another small window that indicates the
installation was not successful. This is what we hope to see and will lead us to
the next step in the process.