Epilog Fusion 13000, Руководство пользователя

Страница: 128 / 228

Section 8: Using the Front Control Panel
98
For instance, follow these steps to change your X Home position:
1) Highlight Config – Restore Home will show on the display
2) To scroll through the Config menu items flick the Joystick down.
3) The first menu item after flicking once is X Home.
4) Center Click the Joystick – A flashing cursor will appear under the number that is displayed.
5) Tilt the Joystick to increase or decrease the value that is shown.
6) Once you have the proper value, press the GO button.
7) For this value to be changed permanently you now need to use the Joystick to go back to the
first menu item, which is Restore Home.
8) Now, Center Click the Joystick. The machine will reinitialize home by moving back in the Y
axis, then left in the X axis and then finally to its standard resting Home position. Your new
value has changed.
Changing these setting from the ECC is easier for most users.
Red Dot Pointer and Laser On Keys:
Red Dot:
The
Pointer
key is a toggle switch that turns the laser systems Red Dot Pointer on and off. When
the Red Dot Pointer is on, the indicator light directly to the left of the
Pointer
key will be
illuminated.
Laser On: