Epilog Fusion 13000, Руководство пользователя

Страница: 157 / 228

Section 11: Engraving Machine Cleaning
127
Cleaning the Exhaust
Make sure the exhaust blower you are using receives proper maintenance.
Periodically clean the exhaust blower and duct system to remove built-up debris. If
you detect odor while engraving, or if the smoke in the cabinet is visible in the area of
the lens carriage, inspect the exhaust system. Check for loose or broken pipe/hose
connections, or obstructions. The photos below show where to clean the duct work of
your machine. You should also occasionally check your exhaust blower and the duct
work that is connected to it.
Clean the vents from the inside
of the machine. It is best to
use a flexible plastic or wire
brush that can access the inside
of the vent.
Clean the down draft ports too.