44
Installation Instructions - Relay Box for Infrared Cabins
Installing multiple cabins
EN
6.1
Configuring 1-8 cabins
Operating mode – standard
In this operating mode, one steam generator or one sauna heater is
operated per cabin.
The lines are connected as follows:
See also the following figures:
Jacks – EmoTouch 3 circuit board,
Setting
01. June 2019
08:44:40
Operation mode
Default:
up to 8 Cabins
1 Steam cabin
with up to 4
Steam generators
and optional
up to 4 additional
cabins
2 Steam cabins
each with up to
4 Steam generators
1 Steam cabin
with up to 8
Steam generators
Cabin no.
Relay box connection – control unit
Cabin address
1
The relay box is connected to the jack #1 of the control
panel using the sauna bus cable.
2
The relay box is connected to a free sauna bus jack in the
relay box of cabin #1.
Relay box is set to address 2.
3
The relay box is connected to jack #2 of the control panel
using the sauna bus cable.
Relay box is set to address 3.
4
The relay box is connected to a free sauna bus jack in the
relay box of cabin #3.
Relay box is set to address 4.
5
The relay box is connected to jack #3 of the control panel
using the sauna bus cable.
Relay box is set to address 5.
6
The relay box is connected to a free sauna bus jack in the
relay box of cabin #5.
Relay box is set to address 6.
7
The relay box is connected to jack #4 of the control panel
using the sauna bus cable.
Relay box is set to address 7.
8
The relay box is connected to a free sauna bus jack in the
relay box of cabin #7.
Relay box is set to address 8.