24
Installation Instructions - Relay Box for Infrared Cabins
Installation
EN
cable conduit or a duct, they must be secured so they cannot be pulled
out.
The lines can be routed between the insulation and the outer wall of the
cabin. They are then passed into the housing from the rear.
In both cases, the cabin insulation must be installed in such a way that the
temperature in the area in which cables are routed cannot exceed 75°C.
4.3.2 Installing the relay box
Necessary steps:
Tools + hardware
Drill
Wood screws 4 x 25 mm
Mounting on a fixed wall: Screws 4 x 25 mm and corresponding anchors
Preparing for installation
1
Identify the installation site.
2
Route the lines.
Removing the housing cover
1
Unscrew the 6 screws for both parts of the housing.