EmoTouch 3 - Operating Instructions
7
General safety instructions
Damage due to
incorrect mounting
location
The control unit is not suitable for outdoor use.
It must be operated only inside buildings and may not be ex-
posed to environmental conditions such as extreme humidity
and moisture or the possible formation of condensation or cor-
rosive substances in the ambient air, as well as other weather
conditions.
Similarly, excessive cold and extreme exposure to sunlight must
be prevented.
Protect the unit accordingly if there is an increased risk of me-
chanical damage.
1.3 Operator instruction
The operator of the infrared or sauna cabin must be instructed in
the general safety instructions during commissioning. The opera-
tor must be given a copy of the operating instructions.
The operator must make the end user aware of safety instructions
that are relevant to the end user.
Risk of electric shock
A risk to life and limb from electric shock and fire arises in the event
of improper repair work. This risk also applies after work is com-
pleted.
The unit covers must only be removed by a specialist.
Repairs and installations must only be performed by a trained
specialist.
The system must be disconnected and removed entirely from
the mains supply before commencing repair work.
Use only original spare parts from the manufacturer.
Fire hazard
Objects placed on the sauna heaters can easily be ignited and
cause fires.
Do not place objects on the sauna heater.
If you switch on the sauna heater using pre-set timers or a re-
mote control, attach a protective cover to the heater or install a
suitable safety device.
Inspect the cabin prior to commissioning.
When using control units with a remote control option (see
EN 60335-1), protection from switching on a covered sauna
heater is required.
