EmoTouch 3 - Operating Instructions
27
Operation
Texts are displayed in the following colours:
White: Status texts, e.g. date, name of sub-menu
Blue: active input digits, e.g. for date, time, timer display
Red: Warning, time display for auto-stop
Display
The display switches to standby mode if there is no activity for a defined
period of time. You can cancel standby mode by tapping the display.
Tap any area on the cabin image to close an open sub-menu.
Sub-menus close automatically if the display is not touched for
10 seconds. After that, the start screen is displayed.
If you have a multi-cabin installation, you can switch to the start screen
by tapping the cabin number in the status bar.
All cabin settings are made at the control panel. At least one cabin must be
set up for commissioning.
5.2 Working with the graphic user interface
The graphic user interface displays icons depending on the selection. Their
use is described below:
The home screen (standby) appears after the display has not been touched
for 10 seconds.
Settings that have not been saved are lost.
Date and time are saved if the built-in battery is charged and in working
order. All other settings are saved permanently.
Tap briefly on the cabin image: The function is switched on or off.
Tap briefly on the sub-menu: The icon is selected.
Tap again: The selection is confirmed.
Press and hold: A sub-menu opens.
Tap anywhere on the cabin image: The sub-menu for settings closes.
Heat on/off
Settings
Next
Back to previous selection or
start
Confirm selection
Clear selection
Increase the value by 1.
Decrease the value by 1.
