92
Operating Instructions - EmoTouch 3
Service settings
EN
6.1.9 Refill period
This setting is available only in humidity mode.
You must set the time during which water must be added to the vaporiser
if the display indicates a water shortage. If water is not added during the
set time, the vaporiser is switched off (overheat protection).
This function is important for Bi-O heaters with manual water filling, in par-
ticular.
Refill period for humidity mode
1
Open the service settings.
See 6.1.1 Opening service settings,
2
Tap
and confirm the selection.
3
Set the value with
and
, and then confirm by pressing
.
The value can be set to any number between 0 and 5 minutes. The
interval is set to 0 minutes by the factory.
min
Setting
01. June 2019
Refilling time
09:16:42
5
