EmoTouch 3 - Operating Instructions
31
Operation
Switching the system off
1
Tap .
If you have not selected a cabin in the multi-cabin installation, all
cabins are switched off via the cabin overview. To prevent an
overload of the mains supply, each cabin is switched off with a slight
delay.
Example: Single installation
After humidity mode is run, the fan that dries the cabin is switched on
and runs for the set amount of time. Then the system switches to
standby mode.
Tap
again to end drying prematurely.
5.4 Basic settings
The most commonly used settings can be set directly in the interactive
graphic user interface. These settings are available in both standby mode
and operation mode.
The following descriptions apply to both private and commercial opera-
tion.
In multi-cabin operation, these settings must be defined separately for
each cabin.
01. June 2019
12:45:40
0:45:40
