14
EN
alle Maße in mm
Änder
ungen v
orbehalt
en
142
202
3
189
128
37
37
4x
4x
4x
4x
4x
Minimum wall depth:
37 mm
First install the housing base (see fig. 8).
1. Loosen 4 screws on the fastening brackets
2. Pull the connection cable and the voltage regulator cable through the cable duct in the hou-
sing base.
3. Insert the housing base into the wall opening.
4. Adjust the brackets by moving them on the fastening brackets of the housing part to the de-
signated wall panelling thickness.
5. Clamp the brackets (by tightening the screw clockwise)
Wall aperture:
Hight: 189 mm
Width: 128 mm
Depth: min. 37 mm
Installation of the housing base
Flush-mounted installation (wall-mounting)
Fig. 8
Cable duct position
Fig. 9
Notice:
Please pay attention to the
correct orientation of the
bottom housing. The con-
nection cable duct must be
at the bottom side (see fig.
8).
= Dimensions must be strictly adhered to
