32
EN
Operation and program settings
Sauna on / off
Press the
button on the control panel for approx. 3 seconds to switch the sauna on. Count-
down runs
1
2
3
. The display will show the active heating state (see previous page). The
cabin light will be also switched on.
To switch the sauna off press the
button shortly. For Emostyle Hi models in humid mode the
“sauna dry” program will switch on for 30 min. after the main operation. After this program the
sauna will switch off completely.
You can stop the “sauna dry” program at any time - just press the
button again shortly.
Light on / off
Press the light button on the control panel to switch the cabin light on or off.
Sauna operation mode - dry sauna or humid (Bi-O) sauna (only EmoStyle Hi)
Press the UP/DOWN button in the main menu and choose the operating mode with the
sym-
bol.
Select
for the dry Finnish sauna or
for the humid (Bi-O) sauna mode.
Temperature
Select and press the temperature symbol
in
the main menu. A submenu will open and show
the current value. Set the new temperature with
the ENTER button. Press the ENTER button to
confirm and exit. This setting can be also made
during active heating.
Humidity (only EmoStyle Hi)
Select and press the humidity symbol
in the main menu. A submenu will open and show the
last stored humidity value. Set the desired humidity with the UP/DOWN button. Press the ENTER
button shortly to confirm the setting and exit. This setting can be also made during active heating
(in humid mode).
With a connected humidity sensor (% sign appears inside cloud) the relative air humidity will be
controlled. Without humidity sensor the humidity will be controlled in proportional to time way.
“30%” then means 30% of the total heating time. The display will show the
symbol.
20:51
55°
20:51
55°
Temperatur
Einstellung
für Betrieb
mit Verdampfer
(Bi-O)
Einstellung
für Betrieb
mit Verdampfer
(Bi-O)
Temperatur
