13
EN
1,5 m
0,7 m
Notes on mounting the control panel in sauna cabins
Can be used in sauna cabins in areas up to 110 °C (area 2).
Never directly above or in the surrounding area of the sauna heater (area 1),
or in the direct radiation range of short-wave infrared radiators.
.
ATTENTION!
When installing the control panel, ensure the tightness in the inside of the cabin. Excessively high temperatu-
res inside the control panel can lead to errors with the electronic components.
Area 1
Area 2
Area 3
The voltage regulator may be placed e.g. on
the sauna roof. Guide the connection cable of
the voltage regulator to the control panel and
insert the plug into the corresponding small
socket on the circuit board before inserting the
control panel into the lower part (see fig. 7).
The voltage regulator must not be exposed to
elevated temperatures. Therefore, the installa-
tion in the sauna wall is not permitted. The vol-
tage regulator may be placed e.g. on the sauna
roof.
The control panel is equipped with an external
voltage regulator. This component is located
in a small separate metal housing and is con-
nected to the control panel by cable.
Fig. 7
Connect voltage
regulator here
Control panel interior
Voltage regulator
Voltage regulator
