46
EN
HOT-auto interval time
You can start the HOT-function automatically at specific time intervals. In this menu the interval for
this automatic switch-on can be set.
However, the HOT-heat-up phase starts effectively a little earlier, before the set time according to
the set duration. Thereby the sauna stones reach the ideal temperature at the desired start time.
If the system started at a time when the preselected time period of the heating phase should have
already started, the next step of the HOT-interval is executed first.
Example:
When setting the start time:
8:00
and duration:
20 minutes
, the HOT-heat-up phase
begins at 7:40, with a duration of 15 minutes - at 7:45, with a duration of 10 minutes - at 7:50.
• Setting range: 30 to 480 minutes
• Increment: 30 minutes
• Factory default setting: 60 minutes
HOT-auto start time
• In this menu, the start time for the HOT-auto or for the first water splash can be set
• Setting range: 0:00 Uhr to 23:59 Uhr, --:-- corresponds to HOT-auto deactivated
• Factory default setting: --:--
HOT-auto switch-off time
• In this menu, the switch-off time for the HOT-auto can be set
• Setting range: 0:00 Uhr to 23:59 Uhr, --:-- corresponds to HOT-auto switches off with sauna
• Factory default setting: --:--
ECO-time
The duration of the ECO-function can be set in this menu. Upon expiry, the control unit returns to
the normal temperature range.
• Setting range: 0 to 240 minutes, 0 corresponds to only manual deactivation of the ECO-function
• Increment: 30 minutes
• Factory default setting: 0 (only manual deactivation of the ECO-function)
• Notice: at setting 0 - ECO-mode will expire after 18h.
Back (exit service level)
Select and press the
symbol in order to exit the service level. Alternatively you can shortly
press the “Home“ button (on/off button).
The service level will be automatically closed, if you do not operate the control unit for 15 seconds.
The control panel will then return to the start screen.
