31
EN
20:51
20:51
4:23:14
20:51
4:23:14
50%
50%
55°C
55°C
Soll
Ist
Start screen (standby mode)
In standby mode the display will show the symbol for the heater (thermom-
eter). For EmoStyle Hi in humid mode a cloud symbol will be additionally
displayed underneath (symbolizes the vaporizer).
The “%“ sign in the cloud means that the humidity sensor has been detect-
ed on the control unit (means humidity control as per rel. air humidity).
The light symbol will appear at the top right corner if the light has been
switched on. The clock will be displayed at the bottom.
Checking the target and current sauna climate condition
You can quickly check the pre-set (target) and the real temperature (and
humidity for Emostyle Hi). Press the ENTER button
for approx. 3 seconds.
The target and current values will be displayed on the screen. The current
values correspond to the values measured at the respective sensor.
If the 2nd sensor (bench sensor) is installed, then the current temperature
will be shown as measured by this sensor.
Without humidity sensor only the pre-set proportional vaporizer switching
will be shown, with humidity sensor the target and the real humidity in %
will be shown.
Notice
: Please pay attention that the shown values for the current temper-
ature (humidity) are measured at the sensor location point. Because of the
considerable differences in temperature in different parts of a sauna, these
values may vary from the values shown by the instruments mounted at the
sauna wall. We recommend to maintain the climate as it is pleasant to you
instead of blind orientation on some suggested values.
When the sauna is switched on
- the thermometer symbol starts to pulse
red during the heating time, afterwards it will continuously light in red.
The countdown of the remaining heating time will be shown in red at the
top left corner. You can stop the heating at any time by shortly pressing on
the on/off button
.
The blue cloud symbolizes the active humid mode. Humidity regulation
starts after the target temperature has been reached. After the humid
mode, a “sauna-dry“ program will start (up to 30 min., only the heater will
run), unless this program has been disabled in the setup.
Graphic user interface (GUI) and the current climate conditions check
Thanks to the modern graphic user interface, you can quickly access all functions and make nec-
essary settings, as well as make a simple instant query for the current sauna climate condition.
The symbols on the start screen may be displayed in different colours, in order to indicate the cur-
rent operation status - e.g. white colour for standby and red/blue colour for active heating.
For every selected symbol the control panel will display the meaning of this symbol at the top in
one of 19 languages and will provide additional text hints by various settings. For language selec-
tion please see the next chapter.
