General safety precautions
•
This device may be used by children (age
8 and above) and by persons with reduced
physical, sensory, or mental disabilities, or
inadequate experience and knowledge,
if they are supervised or if they have re-
ceived adequate instructions in how to
use the device safely and understand the
associated risks. Children may not play
with this device. Children may not clean
or carry out any user maintenance if un-
supervised.
•
Children are to be supervised, in order to
make sure that they do not play with this
device.
•
!
ATTENTION
: It is forbidden to install
the control box in a closed switch cabinet
or behind a wooden panelling!
•
The electrical installation may only be
done by a qualified electrical technician.
•
You must comply with the regulations of
your power supply company and applica-
ble VDE regulations (DIN VDE 0100).
•
!
WARNING
: Never attempt repairs or
installations yourself, as this could result
in serious injury or death. Only a qualified
technician may remove the housing cover.
•
Please note the dimensions in the instal-
lation instructions, especially when in-
stalling the temperature sensor. The tem-
perature above the heater is critical for the
temperature setting. The temperature can
be held within operating parameters and
a minimal deviation at the bench level of
the sauna cabin can be achieved only if the
device is installed correctly.
•
The device may only be used as intended
as a control unit for sauna heaters up to 9
kW (up to 36 kW when combined with a
power extension unit).
•
Completely disconnect the control unit
from the electrical circuit, i.e. flip all circuit
breakers or the main circuit breaker during
each installation or repair.
•
Please note the safety and installation
information from the sauna heater man-
ufacturer.
•
Make sure to observe the specifications
and instructions of the sauna cabin man-
ufacturer.
!
ATTENTION
: For control units with
remote control functions*, a protection
against switching on if the heater is covered
is required. (e.g. cover protection rail type
1-5).
*Remote control = setting up, controlling or adjust-
ing a unit by a command that can be given out of
view of the unit by means of transfer media such
as telecommunication, audio technology or bus
systems, this also includes weekly timers. (from EN
60335-1)
5
EN
