Please note that an optimal interaction bet-
ween sauna cabin, sauna heater and sauna
control unit is mandatory for a pleasant sauna
climate in your cabin. With this high-quality
sauna control unit you can “operate“ your sau-
na system, and thanks to the many individual
programming options, surely you will quickly
find the setting which suits you best.
Perception in the sauna is very subjective, the-
refore, it really requires your own perception
or that of your family to find the most suitable
settings.
The control units are supplied with the preset
typical climate values for a classic Finnish sauna
or for models with humidity control, as well as
for a sauna with humidity operation.
The following operating instructions describe
how to pre-select “your“ climate in the cabin.
Read these instructions carefully, so that you
General information about
sauna bathing
Preface
quickly and easily find your way though the
programming process. Please note the varia-
tion in temperatures in the cabin while sauna
bathing. The hottest area is directly below the
cabin ceiling, whereas there is a steady tempe-
rature gradient towards the floor of the cabin.
Inversely, the relative humidity is lowest direct-
ly below the cabin ceiling and the highest by
the cabin floor.
For safety reasons the temperature sensor with
the overheat safety shutdown is located on the
cabin ceiling above the heater, as this is usually
the hottest area in the cabin.
Thus, there will always be temperature varia-
tions between the temperature sensor of the
control unit and the thermometer in the cabin.
For example, when pre-setting the cabin tem-
perature to 100 °C, the thermometer inside the
cabin may show 85 °C - 90 °C. This is in accor-
dance with the typical climate inside the cabin.
Only use sauna-suitable (up to 140 °C tempera-
ture-resistant) cabin lights. Always pay attenti-
on to hygiene. Always use hand- or bathing to-
wels to avoid getting perspiration on the wood.
For control units with vaporizer connection
(optional), we recommend to reheat or dry the
cabin after each humid operation, in order to
protect your cabin from possible damage due
to the humidity mode. In addition, in poorly
ventilated rooms, a ventilation fan can be used
to remove the used moist air.
To avoid drafts, you should avoid using any
ventilation system while sauna bathing. It
should only be used if recommended by the
cabin manufacturer.
Dear customer,
you have purchased a high-quality electronic
device with which you will enjoy your sauna for
many years to come. This sauna control unit was
designed and inspected according to the current
European safety standards and manufactured
at the factory in accordance with the quality
management standard DIN EN ISO 9001:2015.
This detailed installation and operation manual
has been prepared for your information. Pay
particular attention to the
important notes
and
the information on electrical connection.
We wish you a restorative and eventful sauna
bathing experience.
4
EN
