11
EN
180 mm
210 mm
Lower mounting holes
Fig. 3
3. Hang the housing on the upper central screw in the upper central mounting hole.
Insert the supplied rubber cable glands into the openings of the bottom of the housing (from
below or from behind, as desired) and then guide the connection cables through these open-
ings.
Screw the lower part of the housing firmly to the cabin wall in the two lower mounting holes
(Fig. 3).
Fig. 4
Knock-out openinigs for connection cables
for heater, vaporizer, fan, lamp.
Knock-out openings
for sensor cables
upper central mounting hole
