Endress+Hauser Stamosens CSM750, Руководство по эксплуатации

Страница: 41 / 48

StamoSens CSM 750 / CSS 70 11 Appendix
Hauser 41
Sensor type SAK 0-700
Parameter Factory setting depending on the selected sensor type
1/m SAK mg/l DOC mg/l TOC mg/l BOD mg/l COD
FRQILJXUDWLRQ
Unit of measure 1/m SAK mg/l DOC mg/l TOC mg/l BOD mg/l COD
Correction factor 0% 0% 0% 0% 0%
Mean value 10 10 10 10 10
Analog output 4-20 mA 4-20 mA 4-20 mA 4-20 mA 4-20 mA
Alarm value A NO current NO current NO current NO current NO current
Alarm value B NO current NO current NO current NO current NO current
Diagnostic alarm NO current NO current NO current NO current NO current
SDUDPHWHUHQWU\
Measuring range-start 0 1/m SAK 0 mg/l DOC 0 mg/l TOC 0 mg/l BOD 0 mg/l COD
Measuring range-end 700 1/m SAK 900 mg/l DOC 900 mg/l TOC 900 mg/l BOD 900 mg/l COD
Alarm value A 100 1/m SAK 200 mg/l DOC 200 mg/l TOC 200 mg/l BOD 200 mg/l COD
Alarm value B 700 1/m SAK 400 mg/l DOC 400 mg/l TOC 400 mg/l BOD 400 mg/l COD
Signal filter 10 10 10 10 10
1st measurement 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h
Measuring interval 0 min 0 min 0 min 0 min 0 min
Cleansing interval 0 min 0 min 0 min 0 min 0 min
Cleansing period 10 s 10 s 10 s 10 s 10 s
FDOLEUDWLRQSRLQWV
Number of measuring points 1 1 1 1 1
VDNLQSXW
1st measuring point 150 1/m SAK 450 mg/l DOC 450 mg/l TOC 450 mg/l BOD 450 mg/l COD
IUHTXHQF\
1st measuring point 4918 Hz 4938 Hz 4938 Hz 4938 Hz 4938 Hz