Endress+Hauser Stamosens CSM750, Руководство по эксплуатации

Страница: 17 / 48

StamoSens CSM 750 / CSS 70 5 Operation
Hauser 17
5.2.2 "MEASUREMENT" Menu
Option Display Range of adjustment
Factory settings (bold) Info
MEASUREMENT
• Acquiring and displaying
– the sensor signal
– the analog current
– the sensor frequency
• Setting the alarm value switches
• Displaying error messages
Measured value
1/m SAK
mg/l DOC
mg/l TOC
mg/l BOD
mg/l COD
mg/l*
mg/l-N*
Displays the unit depending on the sensor type selected in
the CONFIGURATION menu
SAK = Spectral absorption coefficient
DOC = Dissolved organic carbon
TOC = Total organic carbon
BOD = Biological oxygen demand
COD = Chemical oxygen demand
Those units marked with * are only available with the CNS
70 Sensor.
With the
F
key, you can switch between the measured
value, analog output and measuring frequency during
measuring operation.
Analog output
4.00 mA
20.0 mA
Displays the current value corresponding to the measured
value
Measuring frequency 0 ... 5965 Hz
Displays the measuring frequency depending on the
sensor type selected in the CONFIGURATION menu
LED display
For the first measurement, adjacent displays appear after switching-on.
Alternatively, an error situation can also occur after previous normal operation. Then go
into the DIAGNOSTICS menu (s. Chap. 5.2.9) to access the error messages.
LC display