Endress+Hauser Stamosens CSM750, Руководство по эксплуатации

Страница: 40 / 48

11 Appendix StamoSens CSM 750 / CSS 70
40 EHauser
11.2 Factory settings of sensors
!
Note!
If you select the factory settings, all values you have entered so far are overwritten.
Sensor type SAK 0-50.
Parameter Factory setting depending on the selected sensor type
1/m SAK mg/l DOC mg/l TOC mg/l BOD mg/l COD
FRQILJXUDWLRQ
Unit of measure 1/m SAK mg/l DOC mg/l TOC mg/l BOD mg/l COD
Correction factor 0% 0% 0% 0% 0%
Mean value 10 10 10 10 10
Analog output 4-20 mA 4-20 mA 4-20 mA 4-20 mA 4-20 mA
Alarm value A NO current NO current NO current NO current NO current
Alarm value B NO current NO current NO current NO current NO current
Diagnostic alarm NO current NO current NO current NO current NO current
SDUDPHWHUHQWU\
Measuring range-start 0.00 1/m SAK 0.00 mg/l DOC 0.00 mg/l TOC 0.00 mg/l BOD 0.00 mg/l COD
Measuring range-end 50.0 1/m SAK 80.0 mg/l DOC 80.0 mg/l TOC 80.0 mg/l BOD 80.0 mg/l COD
Alarm value A 10.0 1/m SAK 20.0 mg/l DOC 20.0 mg/l TOC 20.0 mg/l BOD 20.0 mg/l COD
Alarm value B 50.0 1/m SAK 40.0 mg/l DOC 40.0 mg/l TOC 40.0 mg/l BOD 40.0 mg/l COD
Signal filter 10 10 10 10 10
1st measurement 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h 01.01.99 0:00h
Measuring interval 0 min 0 min 0 min 0 min 0 min
Cleansing interval 0 min 0 min 0 min 0 min 0 min
Cleansing period 10 s 10 s 10 s 10 s 10 s
FDOLEUDWLRQSRLQWV
Number of measuring points 1 1 1 1 1
VDNLQSXW
1st measuring point 23.4 1/m SAK 40 mg/l DOC 40 mg/l TOC 40 mg/l BOD 40 mg/l COD
IUHTXHQF\
1st measuring point 4426 Hz 5834 Hz 5834 Hz 5834 Hz 5834 Hz