Endress+Hauser SpectraSensors OXY5500, Руководство по эксплуатации

Страница: 78 / 146

OXY5500 Optical Oxygen Analyzer BA02195C
4
–
48 Hauser
Setting the pressure for RATA calculation
After stopping the currently running measurement, the PRESSURE FOR RATA
CALCULATION screen displays. Refer to Figure 4–48.
•
Select Auto and the atmospheric pressure will be measured via the
4-20mA Input.
•
Select Manual if there is no pressure sensor connected to the
analyzer.
a. Type in the current atmospheric pressure value in the respective
unit ( hPa , mbar , PSI , atm or torr ).
b. Press to save changes.
Setting the temperature for RATA calculation
•
Select Auto to measure the temperature for RATA calculation with the
RTD probe (Pt100 temperature sensor).
•
Select Manual if the temperature for RATA calculation is known.
Temperature values can be input in ° C, ° F or K.
a. Switch to the desired temperature unit and change the
temperature value in the input field.
b. Press to save changes.
Figure 4–48 Pressure for RATA calculation