Endress+Hauser Solitrend MMP20, Руководство по эксплуатации

Страница: 41 / 56

Solitrend MMP20 (Option D) S1 moisture probe
Hauser 41
1. Press the Enter key briefly to start the measurement
 The device starts measuring and a rotating symbol appears in place of the battery
symbol in the top right-hand corner for the duration of the measurement
process. No other actions can be performed during this time. The measurement
takes around 4 to 5 s. Once the measurement is finished, the battery symbol
appears on the display again. The individual measurements are displayed on the
left of the screen. The last measured value appears at the top of the list, and older
values are displayed one position down. The arithmetic average is displayed on
the right of the screen. The average value is calculated from the existing
individual values (maximum of six).
2. To delete the measurement series, press the "Down" navigation key
Only a maximum of 6 values can be saved temporarily in the list. Older values are
removed from the list and are no longer used to calculate the average.
Six measurements in the "Average" operating mode already gives the user a representative
measurement result for all the measuring points over a broad range of material.
11.3 Settings
The settings for the handheld device can be changed and adjusted in a variety of ways.
1. Press the Folder key
 The following menu structure appears
2. Select the desired entry using the navigation keys
3. Press the Enter key to select
4. Press the Folder key
 This user exits the current menu item and the Setup menu
Overview of the configuration options
• Mode:
"Average": get an average of up to 6 moisture measured values
• Material cal.:
• Select the desired material calibration in the probe
• Customize a material calibration
• Find probe: search again for a connected probe (if an error occurred during power-up)
• Language: change the system language
• German
• English