Endress+Hauser Solitrend MMP20, Руководство по эксплуатации

Страница: 11 / 56

Solitrend MMP20 (Option D) Electrical connection
Hauser 11
5 Electrical connection
5.1 Connecting the probe
The probe to be used is connected to the handheld device by means of a 7-pin plug.
Incorrect use
Only probes specially designed for this device may be connected to it. If a probe that is not
designed for the device is connected to it, this may damage the device and/or the
connected probe.
The manufacturer is not liable for damage caused by improper or non-designated use.
5.2 Charging the battery
The maximum operating times indicated apply under ideal conditions. The ambient
temperature and recharging cycle can significantly reduce the performance times. In
addition, for technical reasons the recharging capacity drops over time or if the unit is
stored at very high or low temperatures.
Only use the charger supplied to recharge the device. A different charging voltage can
damage the device. If the device heats up while it is charging, this is normal behavior and
is not dangerous. If the device only works briefly or not at all despite being charged
repeatedly, the integrated battery is defective and must be replaced.
Never replace the in-built rechargeable battery yourself. If the battery is defective,
contact the manufacturer directly.