Endress+Hauser Solitrend MMP20 Скачать руководство пользователя страница 7

Страница: 7 / 56

Solitrend MMP20 (Option D)

Basic safety instructions

Hauser

Basic safety instructions

2.1

Requirements for personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill

the following requirements:

‣

Trained, qualified specialists must have a relevant qualification for this specific function

and task.

‣

Personnel must be authorized by the plant owner/operator.

‣

Be familiar with federal/national regulations.

‣

Before starting work: personnel must read and understand the instructions in the

manual and supplementary documentation as well as the certificates (depending on

the application).

‣

Personnel must follow instructions and comply with general policies.

The operating personnel must fulfill the following requirements:

‣

Personnel are instructed and authorized according to the requirements of the task by

the facility's owner-operator.

‣

Personnel follow the instructions in this manual.

2.2

Designated use

Application and media

The device serves as a mobile terminal for measuring material moisture.
The following probes can be connected: SWZ, S1, S1C, S2

Incorrect use

Only probes specially designed for this device may be connected to it. If a probe that is not

designed for the device is connected to it, this may damage the device and/or the

connected probe.
The manufacturer is not liable for damage caused by improper or non-designated use.

2.3

Workplace safety

For work on and with the device:

‣

Wear the required personal protective equipment according to federal/national

regulations.

2.4

Operational safety

Risk of injury.

‣

Operate the device in proper technical condition and fail-safe condition only.

‣

The operator is responsible for interference-free operation of the device.

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers.

‣

If, despite this, modifications are required, consult with the manufacturer.

Repair

To ensure continued operational safety and reliability,

‣

Carry out repairs on the device only if they are expressly permitted.

‣

Observe federal/national regulations pertaining to repair of an electrical device.

‣

Use original spare parts and accessories from the manufacturer only.

Содержание Solitrend MMP20

























































Результаты поиска

Содержание Solitrend MMP20

Отзывы:

Похожие инструкции для Solitrend MMP20

Бренды по названию

Популярные бренды

Endress+Hauser Solitrend MMP20, Руководство по эксплуатации

Результаты поиска

Содержание Solitrend MMP20

Отзывы:

Похожие инструкции для Solitrend MMP20

Бренды по названию

Популярные бренды