6.Wiring
¡Be sure to ground the unit.
Otherwise, there is a danger of electric shock and/or fire.
¡Wiring work shall be carried out only by qualified personnel.
Otherwise, there is a danger of electric shock and/or fire.
¡Implement wiring after checking that the power supply is off.
You may incur electric shock and/or fire.
¡Do not connect wiring to an inverter or operate an inverter that is not mounted
according the instructions given in this manual.
Otherwise, there is a danger of electric shock and/or injury to personnel.
¡Be sure to that input voltage matches the inverter specifications.
Otherwise, there is a danger of electric fire and/or injury to personnel.
¡Be sure not to connect an AC power supply to the output terminals.
Otherwise, there is a danger of electric fire and/or injury to personnel.
¡Be sure not to connect a resistor to the DC-link terminal(P, PB).
Otherwise, there is a danger of fire
¡Remarks for using earth leakage circuit breakers in the main supply.
Otherwise, there is a danger of fire.
¡For motor leads, earth leakage breakers and electromagnetic contactors, be
sure to size these components properly.
Otherwise, there is a danger of fire.
¡Do not RUN/STOP operation by switching ON/OFF electromagnetic
contactors on the primary or secondary sides of the inverter.
Otherwise, there is a danger of fire.
¡Fasten the screws with the specified fastening torque.
Otherwise, there is a danger of fire.
DANGER
CAUTION
6-1
ENDA E-100 INSTRUCTION MANUAL
